Mare Motel with (4) 12x12 Stalls and 12ft Breezeway 5-Rail (WOOD INSERTABLE PANELS)

Mare Motel with (4) 12x12 Stalls and 12ft Breezeway 5-Rail (WOOD INSERTABLE PANELS)

$10,895.95

Note: Select if you want bare metal/rustic or powder coated finish

Color: Bare Metal - Rustic
 
 

36x24 Mare Motel with (4) 12x12 Stalls and 12ft Breezeway

NOTE: MAIN IMAGE IS A COMPUTER RENDERING FOR EXAMPLE PURPOSES ONLY

This is our premium DIY mare motel which has Four 12x12 stalls that are fully covered and a 12ft wide breezeway in the middle. Available in bare metal/rustic or power coated. 

Color: Choose from bare metal/rustic or powder coated which is protected against rust. 

This comes with 5-rail wood insertable panels. These panels and gates will have special brackets that are pre-welded to each panel that will allow you to easily attach 2x10 wood boards to them.

Use 1-1/4" x 1/4" Lag Screws to secure the 2x10 wood boards (not included)

Key Features:

  • Steel Tubing (14-Gauge)
  • Expert Welds
  • Top end caps are welded shut.
  • DIY assembly/install (email us to see the PDF instructions)
  • All horizontal rails are inserted inside the vertical posts.
  • Proudly American Made
  • Lifetime Warranty on All Welds! 

Mare Motel Corral Panel Size:

  • Post: 1-5/8"
  • Rails: 1-1/4"
  • Center Support Tube: 1-1/4"
  • Material thickness: 14 Gauge Steel
  • Panel Length: 12 Ft
  • Panel Height: 5 Ft
  • Breezeway Height: 9-10ft
  • Space between 4 rails: 14-1/4"
  • Space between 5 rails: 10-1/4"

DIY Mare Motel Kit Includes:

  • (6) 12ft Shelter Panels
  • (3) 12ft Breezeway Trusses
  • (10) 25ft Z Purlin Trusses
  • (4) 12ft Panel Gate Combos
  • (4) 12ft Corral Panels
  • (18) 12ft PBR Roof Panel
  • (18) 6.5ft PBR Roof Panel
  • (8) Sections Roof Ridge Cap for A Frame Seams 
  • (64) Panel clamps with Hardware
  • (1) Pack Self Tapping Screws with Rubber Washers
  • (12) Ground Posts with Hardware 
  • 36x24 total foot print

The bare metal panels will get the same patina/surface rust as the oil pipes that all working ranches use. Bare metal orders are normally made to order and may require longer production lead times. If you don't want the rustic-look, then go with our powder coated panels.

CLASS C POWDER COATING

Durable and cost-effective finish though not as strong as Class A. Minor scratches, chips, and blemishes are common. Additional scratches can occur during transit, touch-up paint available if needed. 

Will This Mare Motel Blow Away In The Wind?

No! All of our Mare Motels and Shelter Kits will come with our special Ground Posts that you can cement into the ground. These ground-posts will get bolted to the very bottom rail of each shelter panel. You can easily unbolt these ground-posts at anytime so these are not considered to be permanently attached or concreted into the ground which can save you some hassle if you need to pull a permit.

* THESE MARE MOTEL KITS ARE NOT ENGINEERED STRUCTURES AND DO NOT MEET ANY SPECIFIC BUILDING CODE CRITERIA. PLEASE, CHECK YOUR LOCAL BUILDING CODES BEFORE ORDERING.

HOW TO PLACE AN ORDER:

  1. Submit an order request by adding the product to your Shopping Cart.
  2. On the Shopping Cart page, simply fill out your complete information then submit your order request.
  3. We will respond back with a estimate/invoice.
  4. Complete your purchase conveniently with electronic payment method.